Kompernass KH 4414 User Manual Page 5

  • Download
  • Add to my manuals
  • Print
  • Page
    / 7
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 4
- 3 -
Risk of electric shocks.
Connect the appliance to a mains power socket
supplying a voltage of 220 - 240 V
~
/50 Hz.
Do not operate the appliance if the power cable
or power plug is damaged.
Arrange for defective power plugs and/or cables
to be replaced at once by qualified technicians
or our Customer Service Department.
Never immerse the appliance in water.
Just wipe it with a damp cloth.
Do not expose the appliance to rain and never
use it in a humid or wet environment.
Ensure that the power cable never becomes wet
during operation.
Unplug the appliance immediately after use.
The appliance is free of electricity only when you
remove the power plug from the power socket.
• Do not open the casing or attempt to repair the
appliance yourself. Should you do so, appliance
safety can no longer be assured and the warranty
will become void.
Risk of fire!
Do not use the appliance in the vicinity of hot
surfaces.
Do not place the appliance in locations exposed
to direct sunlight.
If you do, this could lead to overheating and
cause irreparable damage.
Do not leave the appliance unattended when in
use.
Do not use an external timing switch or a separate
remote control system to operate the appliance.
Caution - property damage!
Never attempt to bind flammable, heat-sensitive
and/or meltable materials and do not bind
drawings made on temperature-sensitive paper
or material that could undergo changes in colour
or quality when subjected to heat.
• Fundamentally, never bind valuable or unique
documents. Although this thermal binder satisfies
all relevant safety norms and standards, functional
errors can never be completely discounted - as
with all electrical appliances. Functional errors
with the appliance could cause damage to the
documents being bound.
Description of the appliance
1 Binder shaft
2 Document holder
3 Power cable
4 ON / OFF switch
5 START button
6Control lamp
7 Control lamp
8 Retainer bracket
Operation
Note:
On this first use the development of a light odour
may occur, caused by production residues (a slight
smoke development is also possible). This is normal
and dissipates after a short time. Provide for sufficient
ventilation. Open a window, for example.
1. Ensure the appliance has a stable positioning.
2. Fold the retainer bracket 8 upwards, until it
engages, and draw the document holder 2 out.
IB_KH4414_E26059_LB6 16.04.2009 12:23 Uhr Seite 3
Page view 4
1 2 3 4 5 6 7

Comments to this Manuals

No comments