UNIVERSAL REMOTE CONTROLKOMPERNASS GMBHBURGSTRASSE 21 ⋅ D-44867 BOCHUMwww.kompernass.comID-Nr.: KH2156-08/09-V3 UNIVERSAL REMOTE CONTROL Operating m
- 8 -Record/playback buttons fThe playback buttons f control devices such as DVD/CD players and video recorders: Record Start playback Stop Playbac
- 9 -
- 10 -Code Setup (Programming the remote control)3 Programming methods are available for the remote control: Programming by brand code search, by auto
- 11 -9. If most of the buttons function press the OK button k to save the setting. In the LCD display q "OK" appears. Now the mode "B
- 12 -1. Press the device button e for the device that is to be con-trolled (i.e. VCR).2. Switch the device that is to be controlled with the remote
- 13 -System-SetupSetting the timeThe LCD display q shows you the time of day. You set this as follows:1. Hold down the S button r for a little longe
- 14 -Adjust contrastYou can set the display's contrast as follows:1. Hold down the S button r for a little longer than 3 sec-onds. The notice &
- 15 -Timer SetupThe URC oers 2 timer modes, sleep timer and event timer.Sleep timer1. Press the device button e for the device that is to be con-tr
- 16 - Tips:1. Per timer memory slot a maximum of 14 buttons can be programmed. After entry of the 14th button the sequence will be automatically sa
- 17 -5. First press the button on the URC that is to be taught. In the LCD display q "LEARNING" appears. The URC now waits for the infrare
KH 2156
- 18 -To programme a MacroFor Macro programming proceed as follows:1. Hold down the S button r for a little longer than 3 sec-onds. The notice "
- 19 -To delete all MacrosTo delete all pre-programmed Macros proceed as follows:1. Hold down the S button r for a little longer than 3 sec-onds. The
- 20 - Note:The input of the channel numbers can vary according to the model and brand of the selected devices. If necessary, with multi-digit chann
- 21 -For operation To operate one of the programmed devices with the URC >rst press the corresponding device button e. Then point the URC to th
- 22 -It is possible that you are using the wrong code. Start the >brand code search, the automatic code search or the di-rect code input (manual)
- 23 -Every consumer is legally obliged to surrender batteries/• rechargeable batteries to a community collection centre in their district or to a dea
- 24 - Note: The warranty provisions cover only material or factory defects. The warranty provisions do not cover parts subject to wear and tear• for
- 1 -INDEX PAGEImportant safety instructions 2Device summary 3Initial use 4Unpacking the device / checking the package contents 4Insertin
- 2 -Universal remote control KH2156Read the operating instructions carefully before using the de-vice for the rst time and preserve this booklet for
- 3 -Damage to the deviceIf the device is defective, do not attempt to repair it your-• self. In case of damage, contact the manufacturer or the manuf
- 4 -Initial useUnpacking the device / checking the package contents Important!Keep the plastic packaging well away from small children. There is a
- 5 - Note:If no LCD display q is visible check the polarity of the batteries or install new ones.Operating componentsLCD displayThe LCD display q i
- 6 -The standard readout of the LCD display q consists of the details for the relevent device, for example, "TV", the initial for the day o
- 7 -CH +/— buttons u Change the reception channel.MACRO button i MACRO button i followed by a number button o 1-4 activates a previously saved c
Comments to this Manuals